The advantage of choosing Komilfo products:

The top has a dense consistency, does not drip and is self-leveling.
The finest particles are possible, lay very evenly and create stunning shine and coverage.

Do the standard nail preparation: peel off the previous coat, remove the cuticle, buff the surface and shape the nails as desired. Then it is recommended to clean the nail plate with a disinfectant and degreaser. If necessary, apply ultrabond – a special acid-free preparation for additional adhesion of subsequent coatings to the natural nail.
Apply a thin layer of Komilfo base coat for gel polish on the nail, then cure it in a UV lamp for 2 minutes, or in an LED lamp for 30 seconds.
Apply 2 coats of Komilfo color gel polish . Remember to seal every layer (including base and top). The polymerization time of the color gel polish in the LED lamp is 30 seconds. For UV and weak lamps, we recommend applying a thin layer of color gel polish, due to the high pigmentation of the gel polish. The polymerization time in a UV lamp is 2 minutes. Warning: if you want to use highly pigmented gel polishes, your UV lamp must be at least 36 W and the ice lamp must be at least 9 W, and the bulbs must be changed in a timely manner.
Apply a thin layer of Komilfo Gel Polish Top Coat, cure in an LED lamp for 90 seconds. In a UV lamp, the maximum amount of time indicated on the timer.
Apply cuticle oil when finished.